Agfa isolette iii specs11/30/2022 This will probably fall out, but put it to one side for later. The top cover should be lifted off carefully so you can see how the shutter pin is situated. Be sure to get the right size of jeweller’s screwdriver to avoid marring the screw head. Remove the two small screws and the plate and then undo the larger screw underneath.įinally, there is the small screw at one end of the top cover. The earlier versions have a depth of field disk. It needs a long thin screwdriver to tackle this, but it is a regular thread – unscrew anti-clockwise. With the later versions of the camera, look into the opposite film chamber and move the spool holder out of the way. It may be stiff and hard to move, but it will unscrew by hand. This is a reverse-thread knob, so to unscrew it you must turn it in the opposite direction from the winding arrow. Insert the end of a screwdriver into the side of the spool to help keep it rigid, and then turn the winder knob *clockwise* to unscrew it. You don’t want the mechanism to fall in when you remove the winder knob. Work on a soft cloth surface (white tea towel or similar) so that anything that falls does not bounce away.įirst check you have an empty spool under the winder knob. The instructions are the same for the Agfa Record III and for the Ansco versions. Here are some notes on cleaning the rangefinder should it be necessary.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |